Electrodialytic processes in solid matrices. New insights into batteries recycling. A review.

Electrodialytic Remediation has been widely applied to the recovery of different contaminants from numerous solid matrices solving emerging issues of environmental concern. Results and conclusions reported in studies about real contaminated matrices are summarizes in this work. The influence of the pH value on the treatment effectiveness has been widely proved highlighting the phenomenon “water splitting” in the membrane surface. This dissociation of water molecules is related to the “limiting current” which is desirable to be exceed at the Anion Exchange Membrane in order to produce the entering of protons toward solid matrix. Other important parameters for the optimization of the technique, such as the current density and the liquid to solid ratio, are also discussed through the revision of studies using real solid matrices. This work also focusses on the pioneer proposal of electrokinetic technologies for the recycling of lithium ion batteries considering the relevance of waste properties in the design and optimization of the technique. From a thorough literature revision, it could be concluded that further experimental results are needed to allow an optimal application of the technique to the rising problem of residues from batteries. The main aim of this work is to take the first steps in the recovery of valuable metals from spent batteries, such as Li and Co, incorporating principles of green chemistry.The authors acknowledge the financial support from the “Plan Propio de Investigación de la Universidad de Málaga with Project numbers: PPIT.UMA.B1.2017/20 and PPIT.UMA.B5.2018/17 and the European project THROUGH H2020-MSCA-RISE- 2017-778045. The first author also acknowledge the postdoctoral contract obtained from University of Malaga

Electrokinetic desalination of glazed ceramic tiles

Electrokinetic desalination is a method where an applied electric DC field is the driving force for removal of salts from porous building materials. In the present paper, the method is tested in laboratory scale for desalination of single ceramic tiles. In a model system, where a tile was contaminated with NaCl during submersion and ubsequently desalinated by the method, the desalination was completed in that the high and problematic initial Clconcentration was reduced to an unproblematic concentration. Further conductivity measurements showed a very low conductivity in the tile after treatment, indicating that supply of ions from the poultice at the electrodes into the tile was limited. Electroosmotic transport of water was seen when low ionic content was reached. Experiments were also conducted with XVIII-century tiles, which had been removed from Palacio Centeno (Lisbon) during renovation due to damage of the glazing from the presence of salts. These tiles were severely contaminated with both chlorides and nitrates, and one of the tiles also contained sulphates though at a low concentration. The charge transfer was too low in the experiments to obtain full desalination, but promising results were obtained as significant decreases ([81% Cl-, *59% NO3 - and *22% SO4 2-) were seen.info:eu-repo/semantics/publishedVersio